How much do you overlap wood siding?

Wood siding is typically overlapped ½ to 2 inches.

What type of wood is used for clapboard siding?

Clapboard siding is typically produced from cedar, pine, oak, and spruce. The species of wood used often depends on the forest type in your area.

How long does clapboard siding last?

Clapboard siding should last 20 to 40 years, or longer, depending on the amount of maintenance it receives.

What are the advantages of clapboard siding?

Clapboard is a naturally produced, sustainable product that is relatively easy to install, cut, and shape. It can last for generations if properly cared for, and it quickly breaks down at the end of its life. Many people desire the natural charm clapboard siding provides.

What are the disadvantages of clapboard siding?

Clapboard siding can be expensive, depending on wood type and grade. It can be susceptible to moisture damage and therefore requires a fair amount of maintenance. It must be treated after its installed and refinished every couple of years, which can be costly.

What is the difference between clapboard and wood siding?

Clapboard is a type of wood siding that comes in long, narrow planks installed horizontally, often overlapping, on the exterior walls. Clapboard wood siding can be made from several types of wood. Various colors and finishes can be applied to clapboard wood siding to provide a rustic aesthetic.

Is clapboard siding expensive?

While it may cost more than vinyl siding, clapboard wood siding has a significantly longer lifespan, especially if it's well maintained. Clapboard siding costs $3.50 to $6 per square foot, for materials only. After installation, clapboard siding can range from $6.50 to $10.50 per square foot, depending on the species and grade of wood it's made from.

How high off the ground should clapboard siding be installed?

It's important to maintain a 6" ground clearance and 3/4" to 2" off the roof to prevent water damage.

How is clapboard siding cut?

Clapboard siding is made by sawing lengthwise. A narrower edge is created on one side, while a wider edge is cut on the opposite side. This allows for the boards to be placed in a horizontal overlapping pattern. The average exposure per board is roughly four to eight inches. Less exposure will cost more as more material is needed.

Is clapboard siding water-resistant?

Clapboard siding sheds water quite well. Paint and other treatments can help protect the wood from water damage and other natural elements. Water damage can occur when the siding is damaged or when moisture wicks into the end of the grain, as the siding could absorb moisture much faster than other wood surfaces. Look to commons signs of rot such as warping, cracks, or loose clapboards.

What is the difference between shiplap and clapboard?

Shiplap boards use a rabbeted edge on each side to overlap and fit closely together. As for clapboard, it is typically installed horizontally, with each board overlapping the next, and usually, one edge is thicker than the other.

How much does it cost to replace clapboard siding?

Clapboard wood siding costs $3.50 to $6 per square foot for materials and $6.50 to $10.50 per square foot installed. The cost of replacing clapboard siding depends on the square footage of the area that requires replacement plus any additional damage.

What does clapboard siding look like?

Clapboard siding is a siding made of wood that is installed horizontally in an overlapping pattern from the bottom of the wall moving up. Today, many common sidings, such as vinyl, aluminum, composite, and fiber cement siding, imitate the clapboard look. Clapboard can be painted, stained, charred, or weathered to provide a rustic and authentic look.

Learn about Clapboard Wood Siding

Clapboard is a classic exterior cladding made of horizontally overlapping wood boards. Clapboard is also commonly referred to as lap siding, bevel siding, weatherboard, clawboard, and cloboard. Pine, cedar, oak, spruce, or other softwoods are typically used. Clapboard can be stained, painted, charred, or allowed to naturally weather. A lesser-known fact is that the name clapboard originated from the Dutch word klappen, meaning "to split." Klappen, or "to split" refers to the various wood species split by hand to make clapboard.

Look for locally harvested, Forest Stewardship Council (FSC) certified wood.

Look for high-quality, thicker boards with few knots - they will last longer. Installation can be do-it-yourself or look for a contractor with experience with natural wood siding. It's best installed over a 3/4" to 1" air space above the waterproof house wrap layer, with spacers made from wood lattice or strapping, to allow the backside of the wood to air dry after rain and condensation.

While most wood siding types require preservation treatment such as stain or paint, some kinds of wood are more naturally weather resistant than others. In North America, woods such as white cedar, red cedar, and douglas fir can be used as siding without treatment, while woods such as pine and spruce should be treated. Besides paint and stain, charring (light burning with a torch before installation) provides a unique look and a protective coating.

Wood is a classic, easy to install, aesthetically desirable, and renewable material. While still having some drawbacks, such as relatively high maintenance (painting, staining, or replacement), it is a preferred material for those considering a more sustainable exterior shell for their home. In forested regions, it can often be purchased from local sawmills.

In New Zealand, clapboard siding is a popular choice, but it is usually referred to as 'weatherboard.'